![]() ![]() The cartridge comes pre-installed so all that needs to be done is fitting the platter and tonearm counterweight, setting the arm bias, and then plugging the record player into your system with the supplied cables. The aluminium platter is reasonably weighty and would ring quite strongly if it weren’t for the heavy rubber mat that sits on top of it. adapter for singles - 1 pc.Dimensions (hwd) 15 x 44 x 37cm (with dust cover)Įlsewhere we have a belt drive, a DC motor that’s decoupled to reduce any transfer of vibrations into the main structure and a choice of 33⅓, 45 and 78 RPM speeds at the twist of a dial. used SHURE M75, type D cartridge - 1 pc. Dual 1218 turntable in the original Dual plinth (walnut), no cover - 1 pc. 1 musical semitone) - Tonearm: torsionally rigid aluminium tubular tonearm, in 4-point gimbal suspension, - Turntable platter: antimagnetic 2,1 kg (4.62 lb) diameter: 270 mm (10.63”), - Wow and flutter 59 dB.ĭimensions (L x W x H): approx. It is normally pre-set for 220 volts, 50 Hz, - Motor: shaded pole synchronuous motor, 4-pole, with radial flexible suspension, - Drive system: idler drive – transmission to turntable platter via highly wear-resistant, compliant idler wheel, - Speeds: 33 1/3, 45 and 78 rpm, - Pitch adjustment range: 6% on all three speeds (approx. Power: 110 - 125 V, 220 - 240 V 50 - 60 Hz – depending on choice of interchangeable motor pulley. The turntable does not have a dust cover. replaced with a new one: the capacitor in the power supply and the power cord (lenght approx. The mass of the tonearm and turntable is also carried out separately - the cable shield. Separate signal and mass leads for each channel. 90 cm / 35.4") interconnect cable - made on low-capacitance DK4 cable from Schulz-Kabel (Germany). – the arm wiring was replaced with a copper litz wire in cotton braid 7 x 0.07 mm (7 x 0.002”), – new audio cables are installed (length. Test reports - turntable Dual 1218 (.PDF): download. Spindle is not included with the turntable.īrochure - turntable Dual 1218/1229 (.PDF): download. All 1/2 inch inserts can be mounted on the headshell, from 1 to 12 g (0.002 to 0.026 lb) - including fixing elements.Īfter using the appropriate element (so-called spindle), it is possible to automatically listen to up to 6 discs - one after the other. The original, used SHURE M75 (Type D) cartridge is fitted. The whole works properly and offers a balanced, cultural sound. Additionally, the turntable is equipped with the "Anti-Skating" and "Pitch-Control" controls. A suitable switch allows you to choose the diameter of the vinyls to be listened: 17, 25 and 30 cm (6.69”, 9.84” and 11.81”). This last speed allows you to listen to older shellac plates. Allows you to listen to vinyl records with three speeds: 33 1/3, 45 and 78 rpm. You can also initiate the start manually. Dual 1218 - is a full automatic: it allows you to start with one lever, after the end of playback, the arm automatically returns to the starting position. The turntable is operational, all functions work correctly. Replaced with a new capacitor in the power line. The arm lift grease has been replaced with a new one, the lift works with the right resistance. The engine is after a comprehensive technical inspection and lubrication - it keeps the speed correctly. All of its components have been checked and subjected to appropriate service activities. The turntable is after a complete review and renovation - the old grease has been removed, the entire mechanism has been washed and re-lubricated. In the turntable you can use the disc changer spindle - it allows you to automatically listen to several discs one after the other (the spindle is not included). The turntable has the original Dual plinth (walnut) and is a wonderful combination of a full sound transition with the 70s design. Dual 1218 - a traditional idler drive, manufactured in the early 1970s. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |